Harvey Hv3 Water Softener Installation Manual Free [work] «2024-2026»
The Harvey HV3 is an older, non-electric twin-cylinder model known for its compact design and compatibility with standard block salt. While highly efficient, it is sensitive to high water pressure and requires specific installation steps to ensure long-term reliability. Harvey HV3 Installation Requirements
Salt: Manually add about 5 liters of water to the cabinet before loading your first salt blocks. harvey hv3 water softener installation manual free
Drainage: You need access to a waste pipe and an overflow point. Installation Steps The Harvey HV3 is an older, non-electric twin-cylinder
Protection: The softener must be protected from freezing temperatures and direct sunlight. The softener must be installed in a position
Access: You need enough room to lift the lid and slide in salt blocks. Level Ground: The unit must sit on a flat, stable surface.
Connect the 3/8” drain tube to the "JG" (John Guest) push-fit connection on the softener. Run this to a suitable waste point with an air gap to prevent back-flow.
Inside the manual (page 22) is a warranty registration QR code. You must register within 30 days of installation. Without the manual, you might miss this deadline.
- The softener must be installed in a position where a safe overflow drain is available.
- Do not install in areas subject to freezing.
- Ensure the power supply (transformer) is protected from water.
