Gpib-usb-hs Driver Windows Xp 2021 <PC>

Legacy Interfacing: Installing the NI GPIB-USB-HS Driver on Windows XP

Published by: Tech Archives Date: April 24, 2026

: If you purchased a used unit, look for the original "NI Device Drivers" DVD, which often contains compatible versions like v15.5. NI Community Installation Steps Uninstall Old Versions

. Support for this specific hardware was first introduced in NI-488.2 version 2.4 Compatible Driver Versions gpib-usb-hs driver windows xp

To use the GPIB-USB-HS controller on Windows XP, you must install the NI-488.2 driver. Because current National Instruments (NI) drivers no longer support Windows XP, you will need to source a legacy version of the software. Recommended Driver Versions

formats), as they don't require an active connection to NI's current servers, which may use protocols XP cannot handle. NI Community Installation Steps Driver for GPIB-USB_HS fir Windows XP - NI Community Legacy Interfacing: Installing the NI GPIB-USB-HS Driver on

The GPIB-USB-HS is a popular interface card used to connect GPIB (General Purpose Interface Bus) devices to a computer via USB. In this blog post, we will guide you through the process of installing and configuring the GPIB-USB-HS driver on Windows XP.

Do not use NI-488.2 18.0 or later — they do not install on Windows XP. Because current National Instruments (NI) drivers no longer

If you have a GPIB-USB-HS and need to make it work on Windows XP, this guide is for you. We will cover driver compatibility, legacy NI-488.2 versions, step-by-step installation, and common troubleshooting errors.