Viva Water Dispenser Manual 8liech-sc-ssd -

This manual-style guide covers setup, operation, cleaning, troubleshooting, and safety.

Locate the Child Safety Lock (usually a small button or slider located near/below the red tap).
Push/Slide the safety lock in or up while simultaneously pressing the red tap lever.
Release the lever to stop the flow.

Q: How do I replace the bottle?
A: Open bottom door, pull empty bottle out, insert new one with probe attached. viva water dispenser manual 8liech-sc-ssd

Hot Water Temperature: 176°F – 197.6°F (80°C – 92°C) Cold Water Temperature: 37.4°F – 50°F (3°C – 10°C) Dimensions: 40.5" H x 12.6" W x 15" D Weight: Approximately 36.8 lbs (16.7 kg) Initial Setup and Installation Viva water dispenser model 8liech-sc-ssd Locate the Child Safety Lock (usually a small

Unplug the dispenser.
Drain all water from the tanks using the drain valve usually located on the back or bottom of the unit.
Fill the dispenser with a solution of water and vinegar (or a commercial descaler).
Let it sit for 20 minutes, then drain completely.
Rinse by running 2-3 bottles of clean water through the system.

Dispenser is Noisy (Gurgling or Clicking)

Gurgling: Normal. This is air being pulled from the bottle.
Loud Click + Hum: Normal. This is the compressor starting.
Constant Rattling: The silicon tube inside the bottle is touching the sides. Re-seat the bottle.

Are you a proud owner of a Viva water dispenser model 8Liech-Sc-SSD? Congratulations on making a great choice! This water dispenser is designed to provide you with clean and fresh drinking water at all times. However, to get the most out of your device, it's essential to understand its manual operation, installation, maintenance, and troubleshooting procedures. Q: How do I replace the bottle

Thanks in advance!

Monthly (or every 3 bottles)

Unplug the unit.
Remove the water bottle.
Drain remaining water via the taps into a bucket.
Mix 1 liter warm water + 1 tablespoon white vinegar.
Pour into the bottom intake area (where the bottle connects).
Let sit for 10 minutes.
Drain completely via taps.
Rinse by running 2 liters of clean water through both taps.
Reinstall a fresh water bottle.