Vag: 908 Usb Driver 64 Bit |top|
Getting Your VAG 908 USB Interface Running on 64-Bit Windows
How to Install Safely
- Identify your chip – Open device manager, look under USB controllers, or open the cable shell.
To install the VAG 908 USB driver on a 64-bit Windows system (including Windows 10 and 11), you generally need to use drivers that emulate a Virtual COM Port (VCP). Since version 908 is a legacy release, modern 64-bit operating systems may require manual installation via the Device Manager. Installation Guide for 64-bit Systems Download Official Drivers : It is highly recommended to obtain drivers from the Ross-Tech Virtual COM Port Drivers page , as these are designed for 64-bit compatibility. Run the Installer : Unzip the downloaded file and run the VAG-COM-USB-Driver-Installer.exe vag 908 usb driver 64 bit
, navigate to the folder where you unzipped the drivers, and select the Configure COM Port : Once installed, the device should appear under Ports (COM & LPT) Getting Your VAG 908 USB Interface Running on
If you encounter issues with the VAG 908 USB driver 64-bit, try the following troubleshooting steps: Identify your chip – Open device manager, look
3. Identifying the Correct Driver
To successfully install the driver, you must first identify which chipset your specific VAG 908 cable uses. There are two main types of chipsets commonly found in these interfaces:
: Select "Browse my computer for driver software," then choose "Let me pick from a list of device drivers on my computer".
- Device Manager > COM port > Properties > Port Settings > Advanced > Latency Timer = 2 ms.
Step 1: Identify Your USB-to-Serial Chipset
Do not install anything yet. Follow these steps: