V2000-c User Manual |best| <Confirmed · RELEASE>

The V2000-C is a 12V DC standalone RFID access control keypad supporting card-only, PIN-only, or card+PIN modes for up to 2,500 users. It features a default master code of 123456 or 99999, with configurable settings for door release times and anti-tamper alarms. For detailed specifications, view the V2000-C English User Manual. RFID Access Control System User Manual - uAmper

Door Groups: Organize multiple controllers into logical groups for easier management. 5. Troubleshooting Common Issues Potential Cause No Power LED Faulty power supply Check voltage at the terminals with a multimeter. Reader Not Responding Incorrect wiring Verify Data 0 and Data 1 wires aren't swapped. Communication Failure IP Conflict v2000-c user manual

If you have a specific brand, please check your device label — but these tips apply to 95% of V2000-C units. The V2000-C is a 12V DC standalone RFID

Card not reading: Ensure the card type matches the device frequency (EM vs. IC). List important safety precautions and warnings when using

: You can restrict access based on specific cards or defined areas. Relay Settings

Connectivity: Features Wiegand 26 output/input, allowing it to function as a standalone unit or a slave reader.

Safety Precautions

• List important safety precautions and warnings when using the device.