Upgrade Medianav 913 To 10131 !!link!! 〈95% LIMITED〉

Directly upgrading a MediaNav device from version 9.1.3 (Windows CE) to 1.0.13.1 (Linux) is not possible due to incompatible hardware. Attempting this upgrade can permanently damage the unit; instead, users can apply official 9.1.3 updates, use custom firmware like Menaco, or upgrade the hardware for newer functionality. For more details, watch the explanation at Update MediaNav 9.1.3 to Android version 1.0.13.1?

After update:

8. Final Warnings

• Do not turn off ignition during update – unit will brick.
• 10131 expects a newer radio chip. Your 913 tuner may lose AM band.
• Some 913 units have smaller flash (512 MB vs 1 GB). Check free space before upgrade.

• Test core features: touchscreen responsiveness, audio playback (radio, USB, Bluetooth), navigation route planning and guidance, microphone/phone calls, steering-wheel controls, backup camera (if integrated), and any connected vehicle bus features (CAN/OBD-II interactions).
• Check for new settings or changed behavior introduced by 10131 and confirm they are acceptable.

Step 2: Preparing the Drive

1. Insert the SD card into your PC. It will likely show two drives (one small, one large). You want the large partition (usually labeled "R-Link").
2. BACK UP THE ENTIRE CARD. Copy everything to a folder on your desktop. If this fails, you can revert.
3. Format the SD card. I know this sounds counter-intuitive. Use FAT32 (Default allocation size). Do not do a quick format. Do a full format.
4. Unzip the 10.1.31 file. Inside, there will be a folder called _OSUpdate. Copy this folder (exactly as named) to the root of the freshly formatted SD card.
5. Pro tip: There should be nothing else on the card except that folder. No other files. Just _OSUpdate.

Wait: The system will reboot and begin copying files. This can take 20–40 minutes. The screen may go black or show a progress bar. Do not remove the USB or turn off the car.

Unofficial Guide: Upgrading Medianav 913 → 10131

1. Identify Your Current System

• Model: Medianav 913 (older resistive screen, slower CPU, often in early Dacia Sandero/Logan/Duster or Renault Clio IV without R-Link)
• Current SW version: Usually 2.1.1, 2.1.4, or 2.5.x
• Target: 10131 (last known stable build for RN 2.x hardware)

: You cannot "upgrade" the software of a 9.1.3 unit to 1.0.13.1. The 1.0.x versions are designed for the newer ULC4 hardware upgrade medianav 913 to 10131

The Bottom Line

Upgrading from Medianav 9.1.3 to 10.1.31 is the single best free mod you can do for your early-model Renault. It doesn't turn your car into a Tesla, but it turns off the "nagging feeling" that your infotainment system is about to crash. Directly upgrading a MediaNav device from version 9