Manual | Trane Baysens019c

Trane BAYSENS019C a remote zone sensor used primarily with ReliaTel™ control systems in Trane commercial rooftop units

1. Set temperature: Use the up and down arrows to set the desired temperature.
2. Mode selection: Select the desired mode (heating, cooling, or auto) using the mode button.
3. Fan control: Use the fan button to select the desired fan mode (auto, on, or circulate).
4. System status: The thermostat displays the current system status, including temperature, mode, and fan status.

Setting the Clock: Press the Clock button and use the arrow keys to adjust the day and time. trane baysens019c manual

For those looking for the technical details referenced in the story: Trane BAYSENS019C a remote zone sensor used primarily

3. No Proprietary Dongle Required

Unlike some OEM wireless sensors that require a separate $200 gateway, the BAYSENS019C communicates directly with Trane’s ReliaTel board via a dedicated receiver (BAYSENS019B – often sold separately, but referenced in the manual). The manual is explicit: you cannot pair this sensor to a third-party BAS system. It is strictly for Trane RTUs. Set temperature : Use the up and down

: Allows selection between Heat, Cool, Auto, and Off, as well as "On" and "Auto" fan modes. Permanent Memory