;

Leica TCR1203 is a high-performance 3-inch accuracy total station from the TPS1200+ series

4.1 Initial Setup (Tripod & Leveling)

  1. Extend tripod legs, mount the TCR1203 via the 5/8” thread.
  2. Power on using the green button.
  3. Rough leveling: Adjust tripod legs until circular bubble is centered.
  4. Fine leveling: Use electronic level via [FNC] > [Level]. Adjust footscrews until the crosshairs of the electronic level center both axes. Tolerance: < 2.5".

For additional information on the Leica TCR 1203, users can refer to the following resources:

  1. Setting up the instrument: The instrument needs to be set up on a tripod and levelled using the built-in level.
  2. Orienting the instrument: The instrument needs to be oriented to a known direction, such as a benchmark or a reference point.
  3. Measuring points: The instrument can then be used to measure points by sighting the reflector or prism and reading the measurements.