Pro Evolution Soccer 6 (PES 6) remains a fan favorite for its smooth gameplay and extensive modding community. One of the most sought-after mods for fans in the Middle East and North Africa is the Arabic Commentary Patch, specifically featuring the iconic voice of Hafid Derradji .
If you are looking for the classic PC version, search for "PES 6 Hafid Derradji Commentary 2024" or "PES 6 Arabic Patch Mediafire" instead of RapidShare links, which are likely broken or dead. How to Install a Commentary Patch Once you find a working file, the general installation process for PES 6 is: Locate Your Folder: Go to your PES 6 installation directory, typically C:\Program Files\KONAMI\Pro Evolution Soccer 6\dat Backup Original Files: Find the file named e_sound.afs o_sound.afs depending on your version) and copy it to a safe place. Replace File: Pro Evolution Soccer 6 (PES 6) remains a
Téléchargement du patch : Une fois que vous avez trouvé le lien et que vous êtes connecté, vous pouvez commencer le téléchargement. Assurez-vous d'avoir suffisamment d'espace sur votre disque dur. A fraudulent site trying to install malware
Sajian / Rapidsharebfdcml: These are remnants of old file-sharing site links (like RapidShare) or specific forum user tags from the late 2000s and early 2010s when these patches were first heavily traded. If you are looking for the classic PC
[ 35HD-NAS-E ] MRT GigaNAS 35HD-NAS-E 3.5" SATA Single Bay NAS (gemini) ================== !!! IMPORTANT NOTICE !!! ================== This firmware image is compatible with factory bootloader only ============================================================== Product specification: Vendor: MRT Communication Ltd. CPU/SoC: Cortina Systems/Storlink devices CS3516/SL3516 (FA526) @ 300MHz (ARM) Memory: 64 MiB (DDR1 SDRAM) Flash size: 16 MiB (Parallel NOR): 3 MiB for kernel and 6+6 MiB for rootfs (1 MiB misc: boot, VCTL, FIS, config) Bootloader: Storlink Boot Loader (zImage) Ethernet ports: 1 x 1000 Mbps (PHY: Marvell 88E1111) Wireless: None MiniPCI slots: None USB ports: 1 x USB 2.0 (back side) Input voltage: 12V DC / 2A via Philmore 258 Barrel Plug, Type: Adaptaplug N (Polarity: Center positive wiring) RTC battery: CR2032 / 3V lithium battery UART settings: 19200 baud, 8-N-1 mode (TTL compatible logic levels) UART pinout: JP4 / Vcc (3.3V): 1, RX: 2, TX: 3, GND: 5. Device alias: Multicase HD-35SN ============================================================== NOTICE: This image works with the official package repository. ============================================================== Files: - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-zImage.img LZMA kernel (parition: Kern), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-bootlog.txt device bootlog (dmesg), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-squashfs.img squashfs filesystem (parition: Ramdisk), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-sysupgrade.tar.gz sysupgrade image, - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e-packages.txt packages list (opkg list-installed), - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e.md5 MD5 checksum. ========= CHANGELOG ========= Chaos Calmer 15.05.1 (r48532) - openwrt-15.05.1-gemini-mrt-giganas-35hd-nas-e* - 2018-03-14 ------------------------------------------------------------------------------------------- [UPD] Updated to Openwrt Chaos Calmer v15.05.1 (r48532), [NEW] Darkmatter theme for LuCI added. Chaos Calmer 15.05 (r46767) - openwrt-gemini-mrt-35hd-patafix+jp3-led* - 2016-07-30 ----------------------------------------------------------------------------------- [FIX] Memory size modified to 64MB, [MOD] The device has no Machine ID so it uses ID of Raidsonic NAS4210-B: 0x1fff (8191), [NEW] JP3 (GPIO #14) unsoldered LED pin support added (mrt35hd:jp3:hdd -> idedisk), [FIX] Default trigger changed for JP3 pin: idedisk (kernel based), [FIX] ATA Channel #1 disabled, [NEW] Kernel modules compiled into the kernel: leds-gpio, ledtrig-ide-disk. [FIX] Sysugrade and ramdisk image published and firmware size fixed (hddapp removed), [NEW] Necessary kernel modules and packages added to rootfs image. [ FIRMWARE SUMMARY ] Kernel version: 3.18.23 Image format: zImage (LZMA) Rootfs Type: SquashFS Build server: itsuki.dev.dtech.hu Build host: Debian GNU/Linux, Version 7.0 Latest build: 2018-03-14 Status: PRODUCTION TEST RESULT: OK