Sinotimer Tm-630s Manual May 2026

The Sinotimer TM-630S is a digital programmable timer switch with a large screen display and a built-in battery for memory backup. It is designed to control electrical equipment according to preset schedules. Core Specifications

Press P again to set the "1 OFF" time. Repeat the D+, H+, and M+ steps for when the device should turn off. Press the Clock button to save and exit. 3. Manual Override Use the MANUAL button to toggle between three modes: ON: Permanently turns the connected device on. OFF: Permanently turns the connected device off. AUTO: Follows your programmed schedule. Wiring & Installation sinotimer tm-630s manual

For detailed wiring diagrams and technical diagrams, you can refer to the Sinotimer Operating Manual provided by Pic-Control or the official documentation on Manuals.plus.  sinotimer-tm-630a-operating-manual.pdf - pic-control The Sinotimer TM-630S is a digital programmable timer

Technical Specifications

Time: While holding Clock, press H+ (Hour) and M+ (Minute) to set the current time.  3. Setting ON/OFF Programs  Operating Voltage : 220–240V AC, 50/60Hz (verify your

How to Reset the Sinotimer TM-630S to Factory Defaults

If you have lost your settings and the manual is missing, here is the universal reset:

2. Key Specifications

• Operating Voltage: 220–240V AC, 50/60Hz (verify your model’s label)
• Contact Rating: 16A or 25A resistive load (check label)
• Power Backup: Built-in 100-hour rechargeable battery (keeps time during power outages)
• Accuracy: ±1 second/day
• Programming: 16 ON/OFF events, 1-minute minimum setting
• Display: LCD with clock, weekday, and program indicators

Quick reference — common button sequences

• Set clock: Mode/Menu → Day → Hour → Minute → Save
• Add program: P → set ON time → Day → P → set OFF time → Day → Next P
• Delete program: go to program, set ON = OFF (same time) or use Reset for all.
• Reset all: Press Reset (use pin) 3–5s.