Manual Full //top\\ — Simco Fmx002

The Simco FMX-002 is a portable, non-contact digital electrostatic fieldmeter designed to locate and measure surface charges with high precision. This compact instrument is widely used in industrial and laboratory settings for assessing electrostatic field strength and distribution. Technical Specifications

Q: My FMX-002 shows "1" or "OL". Is it broken? simco fmx002 manual full

The Simco FMX-002 is an older, legacy model of the popular electrostatic fieldmeter series. While specific digital manuals for the "002" version are rare, its operation is virtually identical to its successors, the FMX-003 and FMX-004, which are standard handheld tools for measuring static electricity and ion balance. The Simco FMX-002 is a portable, non-contact digital

• Safety precautions and compliance (CE, RoHS).
• Detailed specifications (measurement range, accuracy, resolution).
• Battery installation and low-battery warnings.
• Step-by-step operating instructions (Hold, Power, Mode).
• Critical: Calibration procedures and recommended intervals.
• Troubleshooting table (erratic readings, no power, etc.).
• Parts list and optional accessories (e.g., the FMX-004 NIST calibration certificate).

Ground the Unit: Connect the supplied grounding lead to the conductive case of the meter to ensure accurate readings. Safety precautions and compliance (CE, RoHS)

Specifications (typical)

• Power input: [assume typical: 100–240 VAC or 24 VDC — confirm in original manual]
• Frequency: 50/60 Hz (if AC)
• Ion balance: ±X V at 300 mm (specify from manual)
• Decay time: Y s (1000–100 V) at Z mm
• Operating temperature: 0–40°C (typical)
• Mounting: Bench, wall, or overhead (model-dependent)
• Dimensions & weight: See original manual for exact figures

For advanced models equipped with auto-balancing sensors, the manual explains how the device monitors its own ion output to maintain a balance near 0V. This feature is vital for "critical environments" where even minor static potentials can damage microprocessors. The manual instructs the operator on how to interpret these signals, transforming the unit from a passive piece of machinery into an interactive component of the production line.

Grounding: Use the grounding lead provided to connect the conductive resin case to a known ground. Zero Adjustment: If the initial display is not

• A: The manual emphasizes that the 1-inch distance is critical. If you fail to use the standoffs, the inverse square law of electrostatics will cause dramatic fluctuations in readings. Always touch the object with the plastic standoffs, not the sensor housing.