Owon Hds2102s Firmware Update Link -

To update the firmware on your OWON HDS2102S , follow the guide below. Note that OWON uses different firmware tracks based on the hardware version of your device, so verifying your current version is critical before proceeding. 1. Identify Your Current Firmware

Product Selection: Navigate to the section dedicated to your product, the HDS2102S. You might find it under the "Oscilloscope" category. owon hds2102s firmware update link

Upgrading Your Owon HDS2102S with the Latest Firmware: A Step-by-Step Guide To update the firmware on your OWON HDS2102S

Resolves a major display bug where graticules were incorrectly spaced at the fastest Connect the oscilloscope to the PC via USB

Document Version: 1.0
Last Verified: April 2026
Disclaimer: Always refer to OWON’s official documentation. This guide is for informational purposes only.

Steps:

1. Connect the oscilloscope to the PC via USB.
2. The device should mount as a mass storage device (similar to a USB drive) or require a specific driver. If the device is not recognized, install the OWON USB driver (often found in the firmware zip file).