Ms-7826 Motherboard Manual

The MS-7826 (HP Kaili) is an OEM Micro-ATX motherboard supporting LGA 1150 4th Gen Intel processors, featuring Intel Z87/Z97 chipsets, 4 DDR3 DIMM slots, and standard PCIe expansion. As an HP-specific board, technical details like the 9-pin front panel header layout are found in HP maintenance guides rather than a single retail manual. For detailed teardown instructions, access the HP ENVY 700 Maintenance Guide HP Support Community

CPU Compatibility: Supports Intel Core i3, i5, and i7 processors based on the Haswell and Broadwell architectures. Specific confirmed models include the Intel Core i7-4770 and i7-4790. ms-7826 motherboard manual

Memory Installation

  1. Identify the memory slots (4x DDR3).
  2. Remove any protective covering from the memory modules.
  3. Align the notch on the memory module with the tab on the memory slot.
  4. Gently push the memory module into the slot until it clicks.

While HP and MSI do not typically publish a single "user manual" PDF for this proprietary OEM board, the following technical guide covers the essential information you would find in one for the MS-7826 (Kaili) motherboard. Core Specifications Manufacturer: MSI (OEM for HP) Form Factor: MicroATX (uATX) - Supported CPUs: 4th Generation Intel Core i3/i5/i7 (Haswell architecture) Memory (RAM) Support DDR3 PC3-10600 (1333MHz) or PC3-12800 (1600MHz) 4 DIMM slots Maximum Capacity: 32GB (4 x 8GB modules) Architecture: Dual-channel support Expansion & Storage 1 PCI Express x16 (Gen 3.0) 3 PCI Express x1 (Gen 2.0) 1 Half-length mini-card slot The MS-7826 (HP Kaili) is an OEM Micro-ATX