Motomaster Battery Charger 111567 Manual Verified 'link' May 2026

The Ultimate Guide to the Motomaster Battery Charger 111567: Verified Manual and User Insights

If you own a Motomaster Battery Charger 111567, you know it is a workhorse for maintaining and reviving automotive, marine, and deep-cycle batteries. However, like any sophisticated piece of equipment, its full potential is only unlocked when you have the correct instructions. Searching for a "motomaster battery charger 111567 manual verified" can feel like a scavenger hunt. Misplaced paper manuals and outdated PDFs from unverified sources lead to confusion, improper use, and even safety risks.

Connect the Positive (Red) clamp to the positive battery post. motomaster battery charger 111567 manual verified

• Connect red to (+) post, black to (-) post.

The Motomaster 11-1567 is a fully automatic, microprocessor-controlled 2/10/30 Amp battery charger. It is designed primarily for 12-volt lead-acid batteries, including: The Ultimate Guide to the Motomaster Battery Charger

C. Setting the Mode

1. Plug charger into a grounded 120V AC outlet.
2. The charger will auto-detect 6V or 12V (verify via meter/display).
3. Select 2A for small batteries (motorcycle, lawn tractor) or overnight maintenance.
4. Select 10A for standard car, SUV, or marine deep-cycle charging.
5. 55A Engine Start Mode – Use only for jump-starting a weak battery while cranking (max 5 seconds on, 120 seconds off).

| Statement in Old Manual | Verified Correction | | :--- | :--- | | "Can charge a completely dead battery (0V)" | False. The 11-567 requires minimum 3.0V to detect a battery. For 0V, you need a "manual" or "force" mode charger. | | "30A Engine Start will jump a dead car" | Partial. It provides 30A assist. If your battery is truly dead (9V), the 30A mode will trip overload. The car needs 200+ amps to start. Use this only for "click, click, click" scenarios. | | "Leave on charger indefinitely" | True (with caution). The float mode is safe for weeks, not years. For winter storage, disconnect after 30 days, then reconnect. | | "Works on 6V batteries" | False. This is strictly a 12V charger. Attempting 6V will trigger the Error LED immediately. | Connect red to (+) post, black to (-) post

Wait for the 5-second countdown on the digital display before cranking the engine.

1. Key Specifications (Verified)

• Model Number: 11-1567
• Input Voltage: 120 Volts AC, 60 Hz
• Charging Voltage Options: 12V / 24V (Selectable via front panel switch)
• Charging Rate (Amps): Selectable between 10 Amps (Slow/Trickle) and 40 Amps (Fast Charge).
• Engine Start Assist: Provides up to 200 Amps of cranking assistance.
• Metering: Equipped with an analog ammeter to display charging current and a voltmeter to display battery voltage.
• Construction: Heavy-gauge steel housing with a carrying handle or wheels (depending on specific sub-version, though typically this model is a portable unit weighing approx. 20-25 lbs).
• Cable Length: Typically 6-gauge output cables with insulated clamps.