Methameasure User - Guide
Review of the “Methameasure User Guide”
| Parameter | Register Address (Decimal) | Data Type | Scaling | Unit | | :--- | :--- | :--- | :--- | :--- | | Methane (CH₄) | 40001 | 16-bit uint | Divide by 10 | % | | Carbon Dioxide (CO₂) | 40002 | 16-bit uint | Divide by 10 | % | | H₂S (Hydrogen Sulfide) | 40003 | 16-bit uint | Raw value | ppm | | Flow Status | 40010 | Bitmask | 0=OK, 1=Alert | N/A | | Sensor Temperature | 40015 | 16-bit int | Divide by 10 | °C | methameasure user guide
Hardware setup
- Placement: Mount laser sensor on a stable tripod; avoid vibrations and direct sunlight on optical sensors.
- Environment: Perform measurements in controlled temperature/humidity where possible; note environmental factors in metadata.
- Power: Use the supplied power adapter. For extended use, enable power-saving mode in settings.
- Maintenance: Keep sensors clean using lint-free wipes and isopropyl alcohol; avoid moisture ingress.
: Fill in the name and date of birth exactly as they appear on the prescription. Edit Image Review of the “Methameasure User Guide” | Parameter
Q: My device is reading 0.00 ppm even when I wave it over a running lawnmower. Is it broken? A: Possibly. But more likely, you have forgotten to remove the plastic cap from the sensor tip. This is our #1 customer support call. We are not joking. Remove the cap. Placement: Mount laser sensor on a stable tripod;
Using Methameasure
6. Configuring Alerts & Thresholds
Alerts are the heart of rapid leak detection. Misconfigured thresholds lead to alarm fatigue.
