Mcgs Hmi Password !new! «360p 2025»

The primary factory or maintenance password for MCGS HMIs (such as the TPC series) is 40721. This password is often used to enter the system interface or specialized configuration menus. Common Default Credentials

Screen/User Password: This is used on the physical HMI hardware to log in as an Operator, Technician, or Admin. How to Reset or Recover an MCGS Password mcgs hmi password

3. "Generate Policy" (Password Policy)

In newer versions of MCGS (like MCGS Pro), there are security policies you can generate/configure. The primary factory or maintenance password for MCGS

Part 1: Understanding the Two Types of MCGS Passwords

Before attempting a reset, you must identify which password you are dealing with. MCGS uses two distinct security layers: Power cycle the HMI

If the application is protected by a custom password, you can attempt recovery using the following methods: Upload from HMI: Connect your PC to the HMI via Ethernet (default IP: 192.168.1.200 ) or RS-232. MCGS Studio MCGS 昆仑通态 Tools (工具) → Upload Project (上载工程)

Testing the Default

1. Power cycle the HMI.
2. Attempt to enter the System Setup menu (usually by tapping the "System" button on the boot splash screen or pressing the top-right corner for 5 seconds).
3. Enter 111111. If that fails, try 888888.

Supervisor/Technician (Level 2+): Modifying setpoints and recipe management.

The Dual Layer of Security: Project vs. System