Lg K41s Isp Pinout New Direct

Introduction

10. Conclusion

The LG K41S ISP pinout is consistent across most LM-K410 variants: lg k41s isp pinout new

Software Workflow (Example Using EasyJTAG)

1. Read EMMC Info – Verify connection (CID, CSD, EXT_CSD).
2. Backup full EMMC – First, dump boot1, boot2, and user area (8GB~32GB).
3. Write new bootloader – Load xbl.elf, sbl.elf, abl.elf from a working LG K41S dump.
4. Repair FRP – Under the "RPMB" tab, format or reset RPMB partition.
5. Write full firmware – Program system.img, boot.img, persist.img from KDZ-extracted files.

What is ISP Pinout?

| EMMC Pin Number | Signal Name | ISP Function | Recommended Soldering Point (Alternative) | |---------------------|----------------|------------------|------------------------------------------------| | J3 | DAT0 (Data 0) | Main data line | Via near resistor R131 (0Ω jumper) | | J4 | VDDi (1.8V) | DO NOT CONNECT | Leave floating | | K3 | CLK | Clock signal | Test point TP907 (under the shield) | | L3 | CMD | Command | Test point TP908 (adjacent to CLK) | | N1, N2, N5 | VCC (3.3V) | EMMC power | Do not connect – use phone battery | | GND via pad | GND | Ground | Any large ground plane or shield | Introduction 10