The hum of the server room was a low, industrial purr as Elias cracked the seal on the Knox KeySecure 3B
Insert the tech-key into the lock and turn it until loosened to remove the faceplate. Mounting the Housing: For vehicles, choose a solid structural surface.
Resetting: To reset in the field, press and hold the arrow key until the lights flash.
The 3B model is programmed using PC-based administration software (compatible with Windows XP/2000). User Management
Features a 4-position quick-connect terminal block for easy installation. Relay Circuit:
- System not powering on: Check the power cords and ensure that the system is properly connected to the power source.
- Key control module not functioning: Check the key control module and ensure that it is properly installed and configured.
Remove the security screws from the Tech Lock Cover by turning them counter-clockwise. Mounting Standards : Use at least four Grade 5 or 8 fasteners of
Surface Mounting: If mounting to an interior wall, ensure it is a solid, flat surface.
Tools Required: A specialized Tech Key (Technician Access Key) and a tamper-proof security hex wrench are mandatory to open the unit for mounting or repairs.
Knox Keysecure 3b Installation Manual Hot Today
The hum of the server room was a low, industrial purr as Elias cracked the seal on the Knox KeySecure 3B
Insert the tech-key into the lock and turn it until loosened to remove the faceplate. Mounting the Housing: For vehicles, choose a solid structural surface.
Resetting: To reset in the field, press and hold the arrow key until the lights flash. knox keysecure 3b installation manual hot
The 3B model is programmed using PC-based administration software (compatible with Windows XP/2000). User Management
Features a 4-position quick-connect terminal block for easy installation. Relay Circuit: The hum of the server room was a
- System not powering on: Check the power cords and ensure that the system is properly connected to the power source.
- Key control module not functioning: Check the key control module and ensure that it is properly installed and configured.
Remove the security screws from the Tech Lock Cover by turning them counter-clockwise. Mounting Standards : Use at least four Grade 5 or 8 fasteners of
Surface Mounting: If mounting to an interior wall, ensure it is a solid, flat surface. System not powering on : Check the power
Tools Required: A specialized Tech Key (Technician Access Key) and a tamper-proof security hex wrench are mandatory to open the unit for mounting or repairs.
