Firmware Updater Rev 0010 .exe File — Hyperx Cloud Ii

The HyperX Cloud II Firmware Updater Rev 0010 .exe is the specific utility used to update the USB sound card (dongle) of the original HyperX Cloud II wired headset. This revision is primarily known for adding PlayStation 4 compatibility, allowing the 7.1 virtual surround sound and volume buttons to function correctly on the console. Essential Pre-Update Checklist

Steps:

  1. Download the official .exe
  2. Right-click → Run as Administrator (important).
  3. Plug in only the USB dongle (headset can stay attached).
  4. The program will detect the current firmware version.
  5. Click Update or Start.
  6. Wait – do not interrupt (usually <1 minute).
  7. It will say “Update successful”.
  8. Close the tool, unplug USB, restart your PC.

The HyperX Cloud II on the desk sat silent, its job done. The executable was gone, deleted from the history, erased from the registry. It was never meant to update the headphones.

Error 1: “No device found. Please connect HyperX Cloud II.”

Causes:

Resolves intermittent microphone dropouts and minor audio popping issues. Installation Instructions

After updating, it is often necessary to refresh the Windows driver to ensure full functionality: Open Device Manager (Windows + X > Device Manager). Expand Sound, video and game controllers. Right-click HyperX 7.1 Audio and select Uninstall. Unplug the sound card and Restart your computer. hyperx cloud ii firmware updater rev 0010 .exe file

The interface will display your "Current Firmware" and the "New Firmware" (0010). If your version is already 0010 or newer, you may receive a prompt asking if you wish to continue. button. Do

Fix: Unplug all USB audio devices, restart the updater, and plug the dongle only when prompted. The HyperX Cloud II Firmware Updater Rev 0010

Disconnect Headset: Unplug the 3.5mm headset jack from the USB sound card during the update; only the dongle should be connected.