How To Reset Canon Mg2540s __top__ May 2026

Resetting your Canon PIXMA MG2540S is a common troubleshooting step for clearing persistent error messages, such as the 5B00 ink absorber error , or refreshing the internal settings. JustAnswer Method 1: Full Factory Reset (Service Mode)

  1. Turn off your printer: Make sure your printer is turned off.
  2. Press and hold the ON button and the Stop button: Press and hold both the ON button and the Stop button at the same time.
  3. Release the ON button: Release the ON button while still holding the Stop button.
  4. Press the Stop button 4 times: Release the Stop button and then press it 4 times.
  5. Wait for the printer to reset: The printer will now reset. This process may take a few minutes.
  6. Turn on your printer: Once the printer has reset, turn it back on.

How to Reset Canon MG2540S: A Step-by-Step Guide how to reset canon mg2540s

Method 3: The Full Canon MG2540S Service Mode Reset (Fix Error 5B00)

This is the most searched-for solution. If you see Support Code 5B00 or E08, your waste ink counter is full. You must enter Service Mode and run a reset tool. Resetting your Canon PIXMA MG2540S is a common

Step-by-Step Instructions:

  1. Turn off the printer using the ON/OFF button.
  2. Unplug the power cord from the back of the printer and from the wall outlet.
  3. Wait for 60 seconds. (This allows capacitors to drain and memory to clear).
  4. Open the scanner lid and then close it. (This mechanically resets the print head carriage).
  5. Plug the power cord back in directly to a wall outlet (avoid power strips for this test).
  6. Turn the printer on using the ON/OFF button.

: Turn the printer off and then back on again to finish the reset. Alternative Factory Reset Turn off your printer : Make sure your printer is turned off

. You may notice the alarm and power lights alternate blinking during this process.