How To Install Mtk Driver Mediatek Preloader Usb Vcom [Trusted ✯]

Installing the MediaTek (MTK) Preloader USB VCOM driver is a multi-step process often required for flashing firmware or unbricking devices. Because these drivers are often not digitally signed, Windows 10 and 11 will block them unless you first disable Driver Signature Enforcement 1. Disable Driver Signature Enforcement

Step 2 – Update driver quickly

1. Open Device Manager → look under Ports (COM & LPT) or Other devices.
2. Right-click MTK USB Port / PreLoader → Update driver.
3. Browse my computer → Let me pick → Have Disk.
4. Browse to extracted driver folder (e.g., usb_driver/ → select android_winusb.inf or mtk_usbcom.inf).
5. Choose MediaTek PreLoader USB VCOM Port → Install.
6. Ignore security warning.

Can I install this driver without disabling signature enforcement?

Only on Windows 7 or older. On Windows 10/11, it is mandatory. how to install mtk driver mediatek preloader usb vcom

Step 1: Disable Driver Signature Enforcement (Windows 10/11)

This is the most critical step. If you skip this, the installation will fail. Installing the MediaTek (MTK) Preloader USB VCOM driver

When the list appears, press 7 or F7 to select Disable driver signature enforcement. Open Device Manager → look under Ports (COM

Windows usually blocks unsigned drivers. You must disable this check to install the VCOM driver successfully. Driver Easy Update & Security Advanced startup Restart now Troubleshoot Advanced options Startup Settings After the reboot, press on your keyboard to select "Disable driver signature enforcement" 2. Manual Driver Installation

Here’s a concise, step-by-step guide to install the MediaTek PreLoader USB VCOM driver (required for flashing firmware, using SP Flash Tool, or unbricking MTK devices).