V5.0 — Gp Ethernet Printer Tool

This guide outlines how to use the GP Ethernet Printer Tool v5.0 (also known as the GPETHERNET software) to configure and modify the IP address of your Gprinter thermal receipt or barcode printer.  1. Initial Requirements 

For now, v5.0 remains the gold standard. gp ethernet printer tool v5.0

IP Discovery: Users can find the current IP address by performing a "self-test"—turning off the printer, then holding the FEED button while turning it back on. This guide outlines how to use the GP

Assigning or changing IP addresses

1. Select the discovered printer.
2. Choose “Static IP” or “DHCP” depending on your policy. For reliability, assign a static IP or DHCP reservation.
3. Enter IP, subnet mask, gateway, and DNS (if required). Apply and wait for the printer to reboot/network rebind.
4. Re-scan to confirm the new address appears.

: Print a self-test page by holding the "Feed" button while turning the printer on to ensure the new IP is listed. Common Uses Static IP Assignment Select the discovered printer

💡 Why Upgrade if You Have an Older Version?

If you are still running v4.0 or older, you are likely missing out on stability. Older versions sometimes struggled to save settings on newer hardware revisions of GP printers.