Gp-80160 N-cut- Series Driver May 2026

Technical Reference: GP-80160 N-CUT Series Driver

1. Overview

The GP-80160 N-CUT is a high-performance digital stepper driver designed for CNC cutting systems (plasma, laser, or router). It is part of the "N-CUT" series, indicating optimization for smooth, low-vibration motion required for precise kerf control and torch height oscillation.

• Read status (if available) or measure for overcurrent/overtemp conditions; allow cool-down and retry.

• Full model number (e.g., GP-80160, N-CUT-xxx)
• Manufacturer name
• Voltage/current ratings

• Full Cut: Blade cuts all the way through.
• Partial Cut (N-Cut): Blade leaves a small bridge in the middle.
• No Cut: Disables the cutter.

6. Error LED Codes (Red Blinking)

| Blinks | Fault | |--------|-------| | 1 | Overcurrent (short circuit in motor wiring) | | 2 | Overvoltage (input > AC 250V) | | 3 | Undervoltage (input < AC 70V) | | 4 | Motor phase open (disconnected A+/- or B+/-) | | Continuous | Driver overheated (>85°C case temp) | gp-80160 n-cut- series driver

Supported Operating Systems:

To get your printer running, download the official Gprinter GP 80 Receipt Series Universal Driver or the specific 80mm driver for your operating system: Technical Reference: GP-80160 N-CUT Series Driver 1