Epson Wfc5790 Admin Password

The default administrator password for the Epson WorkForce Pro WF-C5790 is typically the product's serial number

If the default credentials do not work because the password was changed and lost, you can use a hidden service menu to initialize the password: the printer. Press and hold the # button while also pressing and holding the Release when the "User Special Mode" menu appears on the LCD. Use the keypad (buttons 3 and 6) to navigate to "Password Initialization" button to select it, then the button to confirm the reset. Restart the printer by pressing the Spiceworks Community Managing Password Settings epson wfc5790 admin password

often requires an admin password to perform essential tasks like firmware updates, network configuration, or security adjustments. The default administrator password for the Epson WorkForce

• Password: (blank – nothing at all, just press OK)
• Password: 1111
• Password: 0000
• Password: admin

EpsonNet Config Utility:

Default Admin Password

The default admin password for Epson printers, including the WF-C5790, is usually admin for the username and password for the password. However, it's highly recommended to change these default credentials during the initial setup to enhance security. Password: (blank – nothing at all, just press

How to access admin settings

1. Find the printer’s IP address from the control panel: Menu → Network Settings → Wi‑Fi / Wired status → IP Address.
2. From a browser on the same network, open: http:/// (or https:///).
3. Login using the admin username/password. The EWS provides access to network, security, firmware, and management settings.