Chevron EW-32 is a versatile 7-day digital timer designed for home automation. This guide breaks down the essential steps to get your timer up and running, from initial setup to advanced scheduling. Initial Setup & Charging
Reset: Use a pointed object like a pen to press the RESET (R) button. This clears all existing settings and returns the timer to factory defaults. Setting the Current Time and Day chevron digital timer ew-32 user manual
The base EW-32 does not auto-adjust for DST. You must manually press SET/CLK mode and +/- to shift the clock by +1 hour in spring and -1 in fall. Chevron EW-32 is a versatile 7-day digital timer
Before programming, you must set the correct time. If the screen is blank or flashing, install/replace the backup battery (CR2032). Press + or - to select today’s day
LCD Screen Indicators:
| Error | Meaning | Solution |
|-------|---------|----------|
| Blank screen | No power or dead battery | Plug timer into a live wall outlet. Replace CR2032 battery. |
| Flashing 12:00 | Power interruption | Reset the clock (see Section 3). Your programs may still be saved. |
| Device turns on/off at wrong time | AM/PM confusion | Check if 6:00 is AM vs PM. Also check the day program (Mo vs Tu). |
| Timer clicks but no power | Overload protection or tripped | Unplug all devices. Reset by unplugging timer for 10 minutes. |
| Can't set minute to 00 | Normal function | Press – when at 01 to roll back to 00. |
TIMER button once. The screen will show Prog 1 ON. The day area will flash.+ / – to cycle day options: