Chaser Ch-e80 Print Driver ❲TRUSTED ›❳
The Chaser CH-E80 is a high-speed thermal receipt printer commonly used in retail, catering, and industrial environments. It is part of the "80 Series" thermal printers, which are designed to be compatible with standard industry command sets and a wide range of operating systems. Key Technical Specifications
4. Speed vs. Quality Trade-off
- High speed (250mm/s) for plain receipts.
- Medium speed (150mm/s) for barcodes or small text.
- Slow speed (80mm/s) for graphics or logos.
Need to get your Chaser Ch-e80 up and running? We’ve got you covered. Chaser Ch-e80 Print Driver
Verdict: Functional but unpolished. Works adequately for single-station, low-volume environments but lacks enterprise-grade reliability, cross-platform maturity, and proactive error handling. The Chaser CH-E80 is a high-speed thermal receipt
3. Change Emulation Mode
Some POS software requires ESC/POS, while others want ZPL (Zebra). The Ch-e80 driver lets you switch: High speed (250mm/s) for plain receipts
| Error Message | Likely Cause | Solution | | :--- | :--- | :--- | | “Driver not found” | Corrupted download or missing INF file | Re-download from official source. Disable antivirus temporarily. | | “Device not migrated” (Windows) | Previous driver remnants | Use Print Management Console (printmanagement.msc) to remove all old Ch-e80 instances, then reinstall. | | Printer prints unknown symbols | Wrong driver (e.g., generic/text) | Delete the printer. Reinstall using the exact .inf file. Select “Ch-e80” not “Generic.” | | Jobs stuck in queue | USB cable or port conflict | Try a different USB port. Reset the printer (power cycle). Clear the queue manually. | | Paper size mismatch | Default page size not set | In Printer Properties > Preferences > Paper Size: set to 80mm x 297mm (or your label size). | | Blue light flashing but no print | Out of paper or sensor blocked | Load paper correctly. Clean the paper sensor with compressed air. |
Once installed, go to "Devices and Printers" to send a test page and verify the auto-cutter works correctly. Technical Specifications for Reference Printing Method: Direct Thermal Paper Width: 80mm (3.15 inches) Resolution: Interfaces: USB + Serial + LAN (depending on model) Command Set: Compatible with ESC/POS or include a troubleshooting section for the auto-cutter? Chaser Ch-e80 Print Driver Work
