It sounds like you’re encountering a low-level boot failure on an embedded system (likely a Rockchip or similar ARM-based SoC), where the mask ROM (BROM) is being disabled due to an eFuse configuration. The code 0x146 typically points to a security or fuse-related policy that prevents further booting.
6. When All Else Fails
- Check vendor documentation: Search for “BROM error 0x146” + your SoC model in the vendor’s TRM (Technical Reference Manual).
- Community help: Rockchip forums, Linux-rockchip mailing list, or Armbian forum users may have board-specific eFuse bypass methods (e.g., clock glitching – advanced, rarely possible).
- Replace the board/chip: For mass-produced locked devices, the device is effectively bricked for unsigned code.
The 0x146 efuse is a hardware-level security lock. The best and most reliable solution is almost always the Test Point method. It physically overrides the security check, giving you full access to the chip for flashing, unlocking, or repair.
Understanding the "BROM Disabled by efuse 0x146" Error: Causes and Best Fixes
Demystifying MediaTek's Security: Understanding "BROM Disabled by eFuse 0x146"
Brom Disabled By Efuse 0x146 Best ~repack~ -
It sounds like you’re encountering a low-level boot failure on an embedded system (likely a Rockchip or similar ARM-based SoC), where the mask ROM (BROM) is being disabled due to an eFuse configuration. The code
0x146typically points to a security or fuse-related policy that prevents further booting.6. When All Else Fails
The 0x146 efuse is a hardware-level security lock. The best and most reliable solution is almost always the Test Point method. It physically overrides the security check, giving you full access to the chip for flashing, unlocking, or repair. brom disabled by efuse 0x146 best
Understanding the "BROM Disabled by efuse 0x146" Error: Causes and Best Fixes It sounds like you’re encountering a low-level boot
Demystifying MediaTek's Security: Understanding "BROM Disabled by eFuse 0x146" Check vendor documentation : Search for “BROM error
/opt/lampp/htdocs/yt-sub/index.php:42:string ‘The permissions associated with the request are not sufficient to download the caption track. The request might not be properly authorized, or the video order might not have enabled third-party contributions for this caption.’ (length=225)
@jamal Are you downloading the caption track of a video which belongs to you? You cannot download caption tracks of videos belonging to other people. Also please check your credentials if they are being passed with the right parameters.
Is there another way to download subtitles for any YouTube video?
No not really. The API does not allow downloading of captions for videos which do not belong to the current user.
Thank you
I found this site diycaptions.com but I want the way it works its not needing youtube api
They must be using some other method. This blog post is only about the Youtube API way of downloading a caption file.