Bradex Bx60 Battery Charger Manual Direct

The Bradex BX60 is a traditional 4-Amp analog battery charger designed for 12V lead-acid car batteries. It features a simple design with a front-facing ammeter to monitor the charging current and built-in protections against short circuits and reverse polarity. Quick Specifications Charging Voltage: 12V DC. Charging Rate: 4 Amps RMS.

Charge smart, charge safe – with your Bradex BX60. bradex bx60 battery charger manual

  1. The Main Unit: A grey/black plastic casing with an LCD screen and control buttons.
  2. Clamp Cables: One red (positive) and one black (negative) alligator clip.
  3. Ring Terminal Cable: An optional cable with O-ring connectors for permanent mounting on motorcycle or boat batteries.
  4. AC Power Cord: Standard IEC C7 “figure-8” power cable.
  5. User Manual: The original booklet (which you are now replacing with this guide).

: Once charged, unplug the charger from the wall first, then remove the clips (Negative first, then Positive). Free-Instruction-Manuals.com Essential Safety Warnings Ventilation The Bradex BX60 is a traditional 4-Amp analog

crocodile clip to the negative terminal of the battery (or the vehicle chassis if the battery is still in the car and negatively earthed). Plug the charger into the AC mains outlet and switch it on. Free-Instruction-Manuals.com 3. Monitoring the Charge Ammeter needle will move to the right (higher amps) when charging begins. The Main Unit: A grey/black plastic casing with

  • Ensure clamps have a firm, metal-to-metal connection – no wobbling.

    • Charge Rate Switch: Toggles between "Slow" (Trickle) and "Fast" charging. LED Indicators: Show power status and charging completion. Operating Instructions 1. Preparation

    Clean Terminals: Use a wire brush to remove any corrosion (the white crusty stuff) to ensure a solid connection. 2. Connecting the Clamps

    Safety Precautions