Behringer C-1 driver setup depends entirely on which version of the microphone you own. While they share the "C-1" name, they use fundamentally different technology: the Go to product viewer dialog for this item.

Q: Why does my C-1 work in Audacity but not in Zoom/Teams?

A: Zoom uses different audio settings. Go to Zoom → Audio → Microphone. Change it from “Default” to your specific audio interface name. Also, ensure Windows isn’t using the mic exclusively (disable “Allow applications to take exclusive control” in Sound Control Panel).

1. The Standard Behringer C-1 (XLR Connector)

Error 1: "No Behringer C1 Driver Found" in Windows Device Manager

Cause: You have connected an analog XLR microphone directly to a computer’s 3.5mm mic jack (or haven’t connected an interface). Fix: You cannot plug the C1 directly into a PC’s microphone port. The signal is too weak and requires preamp + phantom power. Buy a budget interface like Behringer UM2 or UMC22.

C1's sonic voyage took it to distant lands, from the sweat-drenched clubs of Tokyo to the ornate concert halls of Vienna. Wherever it went, the driver remained steadfast, delivering its payload of sound with unwavering dedication. It encountered a diverse cast of characters: audiophiles, music producers, and DJs, each with their own unique relationship with sound.

Alternative: Using Behringer C1 Without an Interface (Not Recommended)

Technically, you could use an XLR-to-USB cable or an inline preamp like the Triton Audio FetHead or Cloudlifter, followed by a USB adapter. However, these solutions are unreliable and often produce excessive noise or lack sufficient gain. Always use a proper audio interface.

This is the most common misunderstanding. The C1 is an analog device – it has no digital components, no USB port, and no internal processing chips. Therefore, it does not need a ".inf," ".sys," or any other driver file to function.

Mount Quality: While the mic is metal, the included swivel mount is plastic and can be flimsy.

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

behringer c1 driver behringer c1 driver

Please specify your message and type of request.
Tel.: +61 (02) 8923 2551

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

behringer c1 driver behringer c1 driver

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +61 (02) 8923 2551

Contact

We are here for you

behringer c1 driver behringer c1 driver

Please specify your message and type of request.
Tel.: +61 (02) 8923 2551

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

behringer c1 driver behringer c1 driver

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +61 (02) 8923 2551

Driver — Behringer C1

Behringer C-1 driver setup depends entirely on which version of the microphone you own. While they share the "C-1" name, they use fundamentally different technology: the Go to product viewer dialog for this item.

Q: Why does my C-1 work in Audacity but not in Zoom/Teams?

A: Zoom uses different audio settings. Go to Zoom → Audio → Microphone. Change it from “Default” to your specific audio interface name. Also, ensure Windows isn’t using the mic exclusively (disable “Allow applications to take exclusive control” in Sound Control Panel). behringer c1 driver

1. The Standard Behringer C-1 (XLR Connector)

  • Connector Type: 3-pin XLR (balanced).
  • Driver Required?: No.
  • How it works: This microphone sends an analog audio signal. To use it with a computer, you must plug it into an audio interface (e.g., Behringer U-Phoria UM2, Focusrite Scarlett, or any USB mixer) or a mixing console.
  • The Driver you actually need: You need the driver for your Audio Interface, not for the microphone. For example, if you buy a Behringer UMC22, you need to download the ASIO driver for the UMC22 from Behringer’s website.

Error 1: "No Behringer C1 Driver Found" in Windows Device Manager

Cause: You have connected an analog XLR microphone directly to a computer’s 3.5mm mic jack (or haven’t connected an interface). Fix: You cannot plug the C1 directly into a PC’s microphone port. The signal is too weak and requires preamp + phantom power. Buy a budget interface like Behringer UM2 or UMC22. Behringer C-1 driver setup depends entirely on which

C1's sonic voyage took it to distant lands, from the sweat-drenched clubs of Tokyo to the ornate concert halls of Vienna. Wherever it went, the driver remained steadfast, delivering its payload of sound with unwavering dedication. It encountered a diverse cast of characters: audiophiles, music producers, and DJs, each with their own unique relationship with sound. Connector Type: 3-pin XLR (balanced)

Alternative: Using Behringer C1 Without an Interface (Not Recommended)

Technically, you could use an XLR-to-USB cable or an inline preamp like the Triton Audio FetHead or Cloudlifter, followed by a USB adapter. However, these solutions are unreliable and often produce excessive noise or lack sufficient gain. Always use a proper audio interface.

This is the most common misunderstanding. The C1 is an analog device – it has no digital components, no USB port, and no internal processing chips. Therefore, it does not need a ".inf," ".sys," or any other driver file to function.

Mount Quality: While the mic is metal, the included swivel mount is plastic and can be flimsy.

Cookie settings