Allwinner H3 Firmware __exclusive__ 【2024】
Before you register the printer and create your user account, you need to connect your printer to the network so that it can be used from a computer. Follow the instructions in the printer's manual to perform the initial setup and network setup.
Note:Allwinner H3 Firmware __exclusive__ 【2024】
Allwinner H3 is a cost-efficient quad-core ARM Cortex-A7 SoC widely used in budget development boards like the
Updating your firmware usually involves "flashing" an image file onto a microSD card. Download the Image Allwinner H3 Firmware
- Short BOOT‑SELECT (or connect FEL pin to GND) during power‑on – forces FEL.
- Run
sunxi-fel ver→ should returnAWUSBFEX. - Upload a minimal SPL with working UART:
sunxi-fel write 0x2000 my_spl.bin sunxi-fel exec 0x2000 - If DRAM init fails, you’ll see no further output. Try alternative SPL (e.g., from Armbian).
- Once U‑Boot runs, reflash full firmware via USB:
sunxi-fel uboot u-boot-sunxi-with-spl.bin # then from U‑Boot: `ums 0 mmc 0` to expose eMMC/SD over USB
The Allwinner H3 SoC is a quad-core Cortex-A7 processor, clocked at up to 1.6 GHz, with a Mali-400MP2 GPU. It supports a wide range of interfaces, including HDMI, VGA, LVDS, and MIPI CSI, making it suitable for various display and camera applications. The H3 also features a range of peripherals, such as USB 2.0, USB OTG, Ethernet, and SD/MMC cards. Allwinner H3 is a cost-efficient quad-core ARM Cortex-A7
 |
Turn on the printer.
|
 |
Download and install Epson Connect Printer Setup from the following URL and then launch the application.
https://support.epson.net/ecsetup/ |
 |
Automatically search for printers. Select the printer, and then click Next.
|
 |
Select Printer Registration, and then click Next.
|
 |
The License Agreement is displayed. Select Agree, and then click Next.
|
 |
When the following screen is displayed, click the button according to your needs.
|
Register a new Epson Global ID
|
Click (tap) Register New Epson Global ID.
|
|
On the "Register New Epson Global ID" screen, enter an email address and password, select your country or region, and then click Send Verification Email.
|
An email is sent to the address you registered with the code required for registration.
|
On the "Verify Email Address" screen, enter the verification code you received, and then click Verify.
|
Epson Connect services are now ready for use.
Epson Global ID already registered
|
Click Add devices to existing account.
|
|
Enter the email address and password registered in Epson Global ID, and then click Login.
|
|
On the "Two-step Verification" screen, enter the verification code received by email, and then click Verify.
|
When the printer is registered to the entered user account correctly, a setup information sheet is printed. A notification email is sent to the registered email address.
Epson Connect services are now ready for use.
Epson Connect services are now ready for use.